- Pantalla táctil para Siemens Repair
- Panel de pantalla táctil HMI
- Proveedores de Pantalla táctil
- Pantalla táctil para reparación de Allen-Bradley
- Reemplazo de pantalla táctil AMT SCHURTER
- Pantalla táctil para B & R Repair
- Pantalla táctil para KUKA Repair
- Para la pantalla táctil Mitsubishi & Beijer
- Pantalla táctil para la reparación de Proface
- Pantalla táctil para la reparación de Omron
- Pantalla táctil para reparar Schneider
- Panel de pantalla táctil ELO
- Reemplazo de pantalla táctil Gunze
- Panel de pantalla táctil DMC
- Reemplazo de pantalla táctil Danielson
- Robótica enseñar a reparar el colgante
- Pantalla táctil EATON HMI Reparación
- Panel táctil para reparación de ESA
- para Fuji Hakko Pantalla táctil
- EZ Automation Pantalla táctil HMI Reparación
- Operador BECKHOFF HMI Reparación
- Reparación del panel de operador gráfico
- Panel de pantalla táctil proveedor
- Módulo de pantalla Lcd para el reemplazo del panel HMI
- Accesorio para reemplazo de pantalla táctil
- Series overview
- More information
- Select by specs
- Troubleshooting
-
- Brand New In StockShips Today
12 Months VICPAS Warranty
Urgent Worldwide Shipping
The Allen Bradley PanelView Standard 1400 Graphic Terminals membrane keypad have a 10 in. Function Keys (F1 - F21) Use the function keys on keypad terminals to initiate functions on the terminal display. These keys may have custom legends. These terminals support operator input via keypad, via touch screen or via keypad with touch screen. On touch screen terminals, initiate the function of a displayed object, such as an ON or OFF push button, by touching the screen object. VICPAS supply membrane keyboard, touchscreen and LCD Display for PanelView 1400 Terminals Panel replacement.
The most complete Allen Bradley Terminals Parts Center
- In Stock
Suppy Touchscreen, Keyboard, and LCD Display for Allen Bradley PanelView 1400 Terminals Replacement
Touch screen Technology: analog resistive
Display Size: 14 in
Display Color: Amber
Software: PanelBuilder (Configuration and Development)
Input Type:Touchscreen & Keypad
Input Power:90-130 Volts Alternating Current
-
How to install the PanelView 1400 terminal in a panel?
1. Cut an opening in the panel using the panel cutout providedwith the terminal. Remove any sharp edges or burrs. Do not drillthe mounting stud holes if you are using clips.
2. Make sure the sealing gasket is properly positioned on theterminal as shown below. This gasket forms a compression typeseal. Do not use sealing compounds.
3. Although the keypad legend strip can be installed any time, werecommend that you install them after the terminal is installed.
4. Place the PV1400 in the panel cutout. The terminal will snapinto the panel as the temporary retaining tabs lock against thepanel.
5. Install the 10 mounting clips (3 on top, 3 on bottom, 2 on eachside). The ends of the clips slide into slots on theterminal.Tighten the clip mounting screws hand tight.
6. Alternately tighten the mounting clip screws until the terminal isheld firmly against the panel. Tighten mounting screws to atorque of 10 inch-pounds. Do not over-tighten.
- Ponte en contacto con nosotros