- Pantalla táctil para Siemens Repair
- Panel de pantalla táctil HMI
- Proveedores de Pantalla táctil
- Pantalla táctil para reparación de Allen-Bradley
- Reemplazo de pantalla táctil AMT SCHURTER
- Pantalla táctil para B & R Repair
- Pantalla táctil para KUKA Repair
- Para la pantalla táctil Mitsubishi & Beijer
- Pantalla táctil para la reparación de Proface
- Pantalla táctil para la reparación de Omron
- Pantalla táctil para reparar Schneider
- Panel de pantalla táctil ELO
- Reemplazo de pantalla táctil Gunze
- Panel de pantalla táctil DMC
- Reemplazo de pantalla táctil Danielson
- Robótica enseñar a reparar el colgante
- Pantalla táctil EATON HMI Reparación
- Panel táctil para reparación de ESA
- para Fuji Hakko Pantalla táctil
- EZ Automation Pantalla táctil HMI Reparación
- Operador BECKHOFF HMI Reparación
- Reparación del panel de operador gráfico
- Panel de pantalla táctil proveedor
- Módulo de pantalla Lcd para el reemplazo del panel HMI
- Accesorio para reemplazo de pantalla táctil
- Series overview
- More information
- Select by specs
- Troubleshooting
-
- Brand New In StockShips Today
12 Months VICPAS Warranty
Urgent Worldwide Shipping
The PanelView Standard 1000 Graphic Terminals membrane keypad have a 10 in. grayscale or color flat-panel display with a resolution of 640 x 480. For specific PanelView terminals, PanelView is replaced with the PV abbreviation. These terminals support operator input via keypad, via touch screen or via keypad with touch screen. VICPAS supply membrane keyboard, touchscreen and LCD Display for PanelView 1000 Terminals Panel replacement.
The most complete Allen Bradley Terminals Parts Center
- In Stock
Suppy Touchscreen, Keyboard, and LCD Display for Allen Bradley PanelView 1000 Terminals Replacement
Touch screen Technology: analog resistive
Display Size: 10.1 i
Display Color: Amber
Software: PanelBuilder (Configuration and Development)
Input Type:Touchscreen & Keypad
Input Power:90-130 Volts Alternating Current
-
How to install the PanelView 1000 terminal in a panel?
1. Cut an opening in the panel using the panel cutout provided with the terminal. Remove any sharp edges or burrs.
2. Make sure the terminal sealing gasket is properly positioned on the terminal as shown below. This gasket forms a compression type seal. Do not use sealing compounds.
3. Although the keypad legend insert can be installed any time, we recommend that you install it after the terminal is installed.
4. Place the terminal in the panel cutout.
5. Install the 6 mounting clips (2 on top, 2 on bottom, 1 on each side); the ends of the clips slide into the slots on the terminal. Tighten the clip mounting screws by hand until the gasket seal contacts the mounting surface uniformly.
6. Alternately tighten the mounting clip screws to a torque of 1.13 N•m (10 lb•in). Do not overtighten. Bezel may not contact enclosure surface.
7. Remove the 2 protective labels covering the top vents of the terminal.
- Ponte en contacto con nosotros