- Pantalla táctil para Siemens Repair
- Panel de pantalla táctil HMI
- Proveedores de Pantalla táctil
- Pantalla táctil para reparación de Allen-Bradley
- Reemplazo de pantalla táctil AMT SCHURTER
- Pantalla táctil para B & R Repair
- Pantalla táctil para KUKA Repair
- Para la pantalla táctil Mitsubishi & Beijer
- Pantalla táctil para la reparación de Proface
- Pantalla táctil para la reparación de Omron
- Pantalla táctil para reparar Schneider
- Panel de pantalla táctil ELO
- Reemplazo de pantalla táctil Gunze
- Panel de pantalla táctil DMC
- Reemplazo de pantalla táctil Danielson
- Robótica enseñar a reparar el colgante
- Pantalla táctil EATON HMI Reparación
- Panel táctil para reparación de ESA
- para Fuji Hakko Pantalla táctil
- EZ Automation Pantalla táctil HMI Reparación
- Operador BECKHOFF HMI Reparación
- Reparación del panel de operador gráfico
- Panel de pantalla táctil proveedor
- Módulo de pantalla Lcd para el reemplazo del panel HMI
- Accesorio para reemplazo de pantalla táctil
- Series overview
- More information
- Select by specs
- Troubleshooting
-
- Brand New In StockShips Today
12 Months VICPAS Warranty
Urgent Worldwide Shipping
The PanelView Standard 550 Graphic Terminals have a 5.5 in. monochrome flat-panel display with 256 x 128 resolution. The touch screen version of the PanelView 550 terminal is available only with 24V DC power. These terminals support operator input via keypad, via touch screen or via keypad with touch screen. VICPAS supply all kind of touchscreen, membrane keyboard keypad and LCD Display for Allen Bradley Panelview 550 HMI Panel replacement.
The most complete Panelview HMI Parts Center
- In Stock
Suppy Touchscreen, Keyboard, LCD Display, and Plastic Case for PanelView 550 terminal Replacement
Touch screen Technology: analog resistive
Display Area (WxH): 120 x 60 mm (4.75 x 2.38 in)
Real-time Clock: Battery-back clock time stamps critical data
Keypad Description Stainless steel domed membrane —Function Keys 10 (F1…F10)
RS-232 Printer Port: 1200, 2400, 9600, 19 200 K
Actuation Rating: Touch 1 000 000 presses
-
How to Install the PanelView 550 Terminalin a Panel?
Follow these step to install the PV550 terminal in a panel.
1. Cut an opening in the panel by using the panel cutout template provided with the terminal and remove any sharp edges or burrs.
2. Make sure the terminal sealing gasket is properly positioned onthe terminal, particularly around the mounting studs as shown.
This gasket forms a compression type seal. Do not use sealingcompounds.
3. On the keypad and keypad and touch screen terminals, securethe ends of the legend strips to the legend strip adhesive.
4. Place the terminal in the panel cutout.
5. Verify that the opening is the proper size to clear the bezel andto allow the gasket to contact the panel.
6. On the keypad and keypad and touch screen terminals, positionthe ends of the legend inserts behind the panel cutout.
7. Install the self-locking nuts hand tight.
8. Alternately tighten the self-locking nuts until the terminal is heldfirmly against the panel.
9. Tighten nuts to a torque of 1.13 Nm (10 lb-in).
10. Remove protective installation label from top vents of terminal
- Ponte en contacto con nosotros