XBTH001010 XBTH002010 XBT-H012110 XBT-H001010 Membrane Keypad for Schneider HMI Panel Repair

The XBTH001010 XBT-H001010 keyboard switch use to replacement Schneider Magelis XBT HMI series. This accessory is 100% compatible and works fine after replacement. It is very durable and a highly cost-effective method for maintaining broadband communications over factory floors seamlessly.
The XBTH001010 HMI features 60 KB of memory and it has 10 to 40 Volts DC input power. Its normal operation requires an operating voltage of 35V DC and produces an operating current of 100mA 1W.

The XBT-H001010 membrane keypad is normal operating temperature ranges from - 20 C to + 80 C and storage temperature ranges from - 40 C to + 80 C, so we should pay attention to the ambient temperature in order to avoid harmful effects on the equipment. In addition, when the users are mounting the XBTH001010 on a panel, it is critical that the users disconnect all the electrical power and make sure that the area around the panel is cleared and to ensure that nothing falls into or onto the installation panel of the module through the DIP switch hole or through the ventilation slots.

Specifications:

The table below describes the parameters of the Magelis XBTH001010 XBTH002010 operator Parts.

PDF Download:

Magelis XBT-H Series Part No.

Common misspellings: 

BTH001010

XTH001010

XBH001010

BTH002010

XBTH00210

XBTH00200

XBTH00201

More information about Schneider Magelis Operator Terminals Parts